User's Manual

transmit data about 80 – 100 meters using the built-in antenna. If you use the high gain

external antenna, you can increase the transmit range up to several kilometers. And

the distance depends on the kind of antenna gain.

Battery Holder: When you load the battery into the Self-Guard, this place keeps a hold

of the battery to the Self-Guard’s body. In order to settle the battery in the Self-Guard,

you need to place the battery onto the back of the Self-Guard’s body, and push the

battery to the upper direction. If you want to detach the battery from the body, then

press this holder with your thumb, and pull it in downward direction.

Li-ion Battery: Rechargeable battery with 3.7 volts and 1400mAh.

Connector with Docking: This is the port where you connect the Self-Guard with the

docking station. Through this port, you can link the connectors in the docking station

with the functions in the Self-Guard. All the functions are included in the Self-Guard’s

body, and the docking station has only the connectors for the external cameras,

microphone, external monitor, sensors, power, USB, and the connector for LAN.

USB Port: You use this USB port when you want to save data for a long period of time

or need to back up saved data in the Self-Guard to the USB memory such as, USB

memory stick or USB hard disk. This port has the USB mastering function, so if you

connect either a USB memory stick or a USB hard disk into the Self-Guard, then it

automatically detects that and enables you to use those USB memories (USB memory

stick and USB hard disk) as a memory expansion or a back up memory.

Cautions

: Do not insert or remove USB memory devices from the USB port in the Self-

Guard while recording or searching. When you remove the USB memory device from

the Self-Guard, you must exit from “RECORD” or “SEARCH” mode, and select

“REMOVE USB” from main menu and press [ENT] button. After “REMOVE USB NOW”

message appears on the LCD, you can remove the USB memory device from the Self-

Guard.

When you back up the Self-Guard’s data to your computer, first, copy the data in the

Self-Guard to a USB memory device, and then insert that USB memory device to the

USB port in the computer to copy the data in USB memory device to the computer. Use