User's Manual

39
||, ->, => : Stop, Play, High-Speed Play; If you press the [ENT], then the status bar
changes to “-> (Play)” from the stopped status. If you press the [ENT], then the status
bar changes to “=> (High-Speed Play)” from the Play status. If you press the [ENT],
then the status bar changes to “-> (Play)” from the High-speed Play status. If you want
to stop from Playing or High-Speed Playing, then press [ESC].
New files are created every hour on the hour. But if the file size exceeds 10 Mega
bytes, then it automatically makes a new file even if the time is yet to be on the hour. If
there is no motion at all, then there will be no file created. While playing the files, you
can control the volume of the speaker by pressing [ ] to make it quieter or [ ] to ◁▷
make it louder. Press [ESC] to escape from playing the files. Press [ESC] again to go
to the previous menu.
If you have recorded something with multiple cameras simultaneously, then the screen
displays in 4-channel mode as you go into the playback mode. For example, if 6
cameras have been recorded at the same time, the screen displays in 4-channel mode,
and plays for all 4 images saved from camera 1 to camera 4 In order to see the rest of
the cameras’ channel (camera 5 and camera 6), press [▽]. Press [ ] again, to switch ▽
into single channel mode, and the image saved from camera 1 will only show in a
larger screen. Repeat pressing [ ] to see the rest of the camera channels one by one. ▽
After showing the last camera’s data (camera 6) in a single channel mode, it switches
into 4-channel mode, and plays 4 camera channels simultaneously again as you press
[].▽
While playing the data, use [ ] to magnify the image. But, if “1.MON OUT” (“OPTION” △
mode → “8.OTHERS” → “2.EXT MON SET”) is set to ON because you want to search
the data using an external monitor, then [ ] is used to toggle the OSD (On Screen △
Display), not to magnify the images.
If you stop playing the data and press [ ], then the LCD screen is divided into several △
blocks for you select the area that you want to magnify (“1.MON OUT” should be
turned Off). When you select the block that you want to magnify and press [ENT], then
it goes into the magnification mode centering the block that you have chosen.