User's Manual

50
“3.POWER SET”) is not set to “0 minute” but instead, set to “1-9 minutes”, then the
Self-Guard automatically turns off its power after selected time gets elapsed.
BUILT-IN RS-MMC USB
Types of
Memory
Built-in Flash
Memory
Additional Memory Card USB Memory Stick or
USB Hard Disk
Memory Usage Sequence when “OVERWRITE” is “ON”
BUILT-IN RS-MMC USB Memory Usage Sequence
O - - BUILT-IN → BUILT-IN
O O - BUILT-IN → RS-MMC → BUILT-IN
O - O BUILT-IN → USB → BUILT-IN
O O O BUILT-IN → RS-MMC → USB → BUILT-IN
When “5.FILE LIM.” function is turned OFF, you cannot make “OVERWRITE” function
turned ON. To turn ON “OVERWRITE” function, it is required to turn ON “5.FILE LIM.”
function first.
Memory Usage Sequence when “OVERWRITE” is “OFF”
BUILT-IN RS-MMC USB Memory Usage Sequence
O - - BUILT-IN → Stop
O O - BUILT-IN → RS-MMC → Stop
O - O BUILT-IN → USB → Stop
O O O BUILT-IN → RS-MMC → USB → Stop
4-2-6. SCHEDULE
You can program the Self-Guard to reserve recording time schedule in 4 time frames
for a day. Press [ ] or [ ] to turn ON and OFF each schedule. You can ◁▷ preset each
schedule by pressing the [ENT]. If you turn off all options in the schedule menu, then
the Self-Guard turns on “1.ALL DAY” automatically. If you go into the Record Mode
outside of the preset recording time, then the LCD displays with “CHECK SCHEDULE”
message for 5 seconds, and goes into the sleep mode. When the time becomes for the
preset time schedule, Self-Guard exits from the Sleep mode and starts to record. If you
press [ESC] or [ENT] when the Self-Guard is in the sleep mode, then the LCD will
display with a message, “CHECK SCHEDULE” for 5 seconds. During this message is