User's Manual

4-6. SENSOR SET

Select “6.SENSOR SET” using the direction buttons, and press [ENT]. Then the next

screen appears in the LCD as below.

This function sets several options regarding with the external sensors such as, the

methods (Input/Output), and the kinds (NO/NC). You can turn on and off the sensors

connected to the Self-Guard with this function. You can also link the sensors with the

cameras to record the images of the camera when there is a change in the state of the

sensors. If there is a changes in the state of the sensors or detects a motion by the

image processing algorithm, then you can set the Self-Guard to turn on the alarm

linked to the sensor port selected as the output. Also, you can send an alarm signal to

the remote PC connected with the Self-Guard. Move the cursor to each option in the

Sensor set using the Direction buttons, and press [ENT] to change that value.