User's Manual

65
“EDGE” mode, it starts to record audio and video for the time set in the “2.VIDEO
TIME” and “3.AUDIO TIME” as soon as there is a change in the state of the sensors. In
the “NORM” mode, it starts to record audio and video as soon as the sensor detects a
change in its state until the sensor goes back to the original state, regardless of the
“2.VIDEO TIME” and “3.AUDIO TIME”. In other words, if you set the “1.REC TYPE” to
“NORM” then “2.VIDEO TIME” and “3.AUDIO TIME” are deactivated.
4-6-2.VIDEO TIME: In the “EDGE” mode (d.REC TYPE), it sets the video recording
duration(0-9 seconds), when there is a change in the state of the sensors. If you set it
to 0, then the Self-Guard will not record any images even if there is a change in the
state of the sensor.
4-6-3.AUDIO TIME: In the “EDGE” mode (d.REC TYPE), it sets the audio recording
duration(0-9 seconds), when there is a change in the state of the sensors. If you set it
to 0, then the Self-Guard will not record any sounds even if there is a change in the
state of the sensor.
4-6-4.SENSOR TIME: The Self-Guard activates the sensor port selected as the output,
when one of any input sensor detects a motion, and the Self-Guard activates the output
port for the selected amount of time (0 to 9 seconds). Set SENSOR TIME to 0 to
deactivate.
4-7. USB SET