User's Manual

7
Guard. Never use any other AC/DC adaptor besides the one that comes
with this Self-Guard.
¾ Never cover the AC/DC adaptor with a quilt, blanket, or other cover while it
is in use, and do not use it near a heater.
¾ At least once a year, unplug the AC/DC adaptor power cord from the power
outlet and clean the area around the prongs of the plug. Dust build up
around the prongs can create the risk of fire.
¾ If the Self-Guard’s case should ever become cracked due to dropping it or
otherwise subjecting it to rough treatment, immediately turn it off. Next,
remove the Self-Guard’s battery and/or unplug the AC/DC adaptor power
cord from the power outlet, and contact your dealer or nearest STARNEX
authorized service center.
¾ Never use the Self-Guard inside of an aircraft or in any other area where
its use is prohibited. Doing so creates the risk of accident.
¾ Physical damage and malfunction of this Self-Guard can cause the data
stored in its memory to be deleted. Always keep backup copies of data by
transferring them to USB memory stick or USB Hard Disk.
¾ Never remove the battery, disconnect the AC/DC adaptor from the Self-
Guard, or unplug the AC adaptor from the wall socket while a moving
image is being recorded. Doing so will not only make storage of the current
image impossible, it can also corrupt other image data already stored in
the file memory.
 When you are not using the external antenna, do not open the cover of this to
prevent from getting in other substances into this hole, which may cause
problems to the product.
 If you want to use a LAN cable which is not provided in the package, then it
must be the cable with core.
 Test for proper operation before using the Self-Guard
Before using the Self-Guard to record important moving images, make sure
you first record a moving image and check the result to ensure that the Self-
Guard is configured correctly and operating properly.