User's Manual

4-9-2. EXT MON SET

Self-Guard has the A/V (Audio/ Video) output ports, so that you can connect other

components such as, an external monitor and a speaker like a TV. So, you can see the

larger images, and hear the sounds in better-quality than you can in the LCD of the

Self-Guard.

If you press [ ]△ while you playback the data with an external monitor, you can choose

the menu (OSD) to appear on the screen or not. However, [ ]△ is also used to magnify

the image while you playback the data from the LCD. So, if “1.MON OUT” is on, then

you cannot magnify the image while you playback the data with the LCD of the Self-

Guard. You must set OFF “1.MON OUT to use the magnifying function while playback

the data from the LCD of the Self-Guard. In other words, magnifying function cannot be

applied to the external monitor. The Self-Guard’s video output type supports for both

NTSC and PAL, so choose the correct type for your own external monitor. You use

NTSC in North America, and PAL in Europe. When you are not using an external

monitor, turn OFF “1.MON OUT” to save the battery.

4-9-3. POWER SET