User's Manual

4-9-4-2. SENSOR

Turns ON/OFF the alarm when there is a change in the state of the sensor selected as

the input.

4-9-4-2-1. ON/OFF: ON

Set the alarm function when there is a change in the state of the sensor selected as the

input.

4-9-4-2-2. TIME: 1

When there is a change in the state of the sensor selected as an input, the Self-Guard

generates an alarm from the internal speaker. The duration of the alarm is from 0.2 to 9

seconds.

4-9-4-2-3. TYPE: 2

Set the type for the alarm when there is a change in the state of the sensor selected as

an input. There are 5 different types for the alarm (1 - 5).

4-9-4-2-4. VOLUME: 5

Set the volume for the alarm when there is a change in the state of the sensor selected

as an input. There are 5 different levels for the volume (1 - 9).

4-9-4-3. BLUETOOTH (SG-3000 only)

Set the alarm function for each Bluetooth channel when there is a motion detected by

the camera of the Self-Guards which are connected wirelessly via Bluetooth.