User's Manual

8
 Data Error Precautions
Your Self-Guard is manufactured using precision digital components. Any of
the following creates the risk of corruption of data in file memory.
¾ Removing the battery, flash memory card, or USB memory device while
the Self-Guard is performing a record or memory access operation.
¾ Disconnecting the USB cable, removing the Self-Guard from the Docking
Station, or disconnecting the AC/DC adaptor from the Docking Station
while a data communication operation is being performed.
¾ Low battery power.
¾ Other abnormal operations.
Any of the above conditions can cause an error. Follow the instructions
provided by this manual to eliminate the cause of the error.
 USB Memory Device Precautions
Do not insert or remove USB memory devices from the USB port in the Self-
Guard while recording or searching. When you remove the USB memory
device from the Self-Guard, you must exit from “RECORD” or “SEARCH”
mode, and select “REMOVE USB” from main menu and press [ENT] button.
After “REMOVE USB NOW” message appears on the LCD, you can remove
the USB memory device from the Self-Guard.
When you back up the Self-Guard’s data to your computer, first, copy the data
in the Self-Guard to a USB memory device, and then insert that USB memory
device to the USB port in the computer to copy the data in USB memory
device to the computer. Use only the USB cable provided in the package. It
may cause damage to both the Self-Guard and the computer if you connect
the Self-Guard to the computer using other USB cables directly.
When you want to use USB hard-disk, connect AC adaptor to the Self-Guard
before connecting the USB hard-disk to the Self-Guard. Otherwise it may
cause damage to the Self-Guard.
 Flash Memory Card Precautions
Do not insert or remove the memory card from the Self-Guard while recording
or searching. If you want to remove the memory card from the Self-Guard,