User's Manual

This function is to find the Bluetooth ID for your Self-Guard. When you want to connect

to the slave Self-Guards with your master Self-Guard, then you need to know the

Bluetooth ID of the slave Self-Guard. You can confirm those Bluetooth IDs by checking

from “3.MY ID” of the slave Self-Guards and then connect to the slave Self-Guards.

6-4. AUDIO: BT1

This function is to choose one Bluetooth channel to hear the audio from, once you are

connected to several slave Self-Guards via Bluetooth (BT1-BT7).

6-5. AUTO CONN: OFF

This function is to set ON or OFF the automatic connection option when the wireless

connection via Bluetooth got lost caused by poor wireless network environments. The

options for this function are OFF, 1-9, and OFF. If you set it with a number between 1

and 9, then the Self-Guard automatically tires to reconnect to each other for that

selected number of times, and stops after those number of trials. If it is set to OFF, then

the Self-Guard does not try to reconnect even after it gets disconnected. If you set this

function to ON, then the Self-Guard will try to connect to other Self-Guards until it gets

reconnected.

6-6. ANT TYPE: INT

Self-Guard has an internal antenna for the wireless function, and you can select this

“ANT TYPE” to INT (internal) or EXT (external). When you use the internal antenna, the

Self-Guard can transmit data up to 100 meters in places with no obstacles. If you use

the high gain external antenna, you can increase the transmit range up to several

kilometers. And the distance depends on the different kinds of antenna gain. After