410VDSLEXT 410VDSLEXTGB 410VDSLEXTEU Instruction Manual VDSL Ethernet LAN Extender 4-Port 10/100Mbps VDSL2 Ethernet Extender Kit over Single Pair Wire Manual Revision:11/29/2010 For the most up-to-date information, please visit www.startech.
FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Table of Contents Introduction...................................................................... 1 Packaging Contents..................................................................... 1 System Requirements.................................................................. 1 Front View..................................................................................... 2 Rear View..................................................................................... 2 Installation.......................
Introduction The 410VDSLEXT 10/100 4 Port VDSL2 Ethernet Extender Kit over Single Pair Wire lets you span a 10/100 network over long distances (up to 1km) to multiple users or network segments while maintaining high-speed network connectivity.
Front View Rear View 2
Installation Hardware Installation 1. Place each VDSL Extender unit at their respective end-point locations. Make sure an AC electrical outlet is located nearby. 2. Connect the included power adapters to the pair of VDSL Extender units. The Power LED should light up solid. 3. Connect the “Line” RJ11 connector on the VDSL Extender units either directly together with patch cabling, or to a buildings existing analog telephone wiring.
Setup Wizard (CPE Modem only) The Setup Wizard allows for quick and easy configuration of the most common settings (WAN) for the VDSL Extender. Advanced Menu System This section allows for general configuration/administration of the VDSL Extender unit.
5
WAN This section can configure how the built-in VDSL Modem connects to a DSL Internet Service Provider (ISP) through the “Line” RJ11 connector. The modem supports Dynamic IP, Static IP and PPPoE modes. LAN The LAN section is used to configure the IP address and DHCP server on the RJ45 Ethernet side of the VDSL Extender unit. By default the DHCP server is not enabled.
NAT This section is used to configure the advanced features on the Ethernet side of the VDSL Extender unit. This include “Virtual Server”, “Port Mapping” and DMZ settings.
Firewall This section contains numerous intrusion and access control options. Route Allows for creating static routing paths for data transmission. UPnP Allows for enabling/disabling UPnP support.
VDSL2 Allows for manual configuration of the VDSL2 connection.
Specifications 2 x RJ11 female 4 x RJ45 Ethernet female External Connectors (per unit) 1 x DB9 female 1 x DC Power 1 x Power LEDs (per unit) 1 x WAN Link 4 x LAN Link/Activity IEEE 802.3, IEEE 802.3u, ITU G.993.
Technical Support StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access our comprehensive selection of online tools, documentation, and downloads. Warranty Information This product is backed by a one year warranty. In addition, StarTech.
StarTech.com has been making “hard-to-find easy” since 1985, providing high quality solutions to a diverse IT and A/V customer base that spans many channels, including government, education and industrial facilities to name just a few. We offer an unmatched selection of computer parts, cables, A/V products, KVM and Server Management solutions, serving a worldwide market through our locations in the United States, Canada, the United Kingdom and Taiwan. Visit www.startech.