Instruction manual

Instruction Manual

PS/2 Computer

To connect a computer controlled through PS/2, use a StarTech.com 3-in-1 Ultra-Thin

PS/2 KVM cable (Product ID: SVECON) to connect from one of the PC ports to the PS/2

keyboard and mouse, as well as the VGA port of the computer system.

Cascaded congurations

NOTE: The master must have equal or more PC ports than that of the slave. For

example, if an 8-port switch is the Master, an 8-port or 4-port switch can be a Slave, but

not a 16-port switch.

NOTE: PS/2-only models can be cascaded with USB+PS/2 universal models.

NOTE: To be used as Slaves in a cascaded conguration, the slide switch on

SV831DUSB or SV1631DUSB must be adjusted to PS/2 mode.

The ports labelled PC 1 - PC 8 can be connected to either a computer or a Slave’s

CONSOLE port. The ports marked PC A - PC H can only be connected to computers. Use

only the 3-in-1 (PS/2) cables to connect the Master’s PC ports and Slave’s CONSOLE port.

Master KVM switch

Slave KVM switch