Dual mSATA SSD to 2.5in SATA SSD Converter with RAID 25SAT22MSAT *actual product may vary from photos DE: Bedienungsanleitung - de.startech.com FR: Guide de l'utilisateur - fr.startech.com ES: Guía del usuario - es.startech.com IT: Guida per l'uso - it.startech.com NL: Gebruiksaanwijzing - nl.startech.com PT: Guia do usuário - pt.startech.com For the most up-to-date information, please visit: www.startech.
FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Table of Contents Product Diagram.....................................................................................1 Front View..................................................................................................................................................... 1 Back View...................................................................................................................................................... 2 Introduction.......................................................
Product Diagram Front View 1. RAID lock/unlock jumper pins 2. Drive Activity/Fail LEDs 3. Drive #1 mSATA connector 4. Drive #2 mSATA connector 5. Drive #1 mounting bracket 6. Drive #2 mounting bracket 7.
Back View 1. DATA & Power Combo (7+15 pin) 2. RAID setting jumper pins 3. Side mounting holes Introduction Packaging Contents • 1 x Dual mSATA to 2.
mSATA SSD Installation WARNING! SSD Drives and storage adapters require careful handling. If you are not careful with your SSD Drive, lost data may result. Always handle your drive with caution. Be sure that you are properly grounded by wearing an anti-static strap when handling computer components or discharge yourself of any static electricity build-up by touching a large grounded metal surface (such as the computer case) for several seconds. 1.
3. Slide the mSATA connector on your other SSD into the Drive #2 mSATA receprical connector on the 25SAT22MSAT. 4. Press the drive down toward the Drive #2 mounting bracket, until the drive clicks into place. 5. The SSDs have now been installed. Note: To remove drives #1 and #2, pull upward on two the tabs located on the top of either drive, then slide the drives out one at a time.
Configure RAID WARNING! Setting or changing your RAID modes will erase the data or metadata on your existing SSD drives. RAID Lock/Unlock Jumper Pins The RAID lock/unlock jumper pins, located above the drive mounting brackets enable you to lock your RAID configuration so it cannot be changed. Or unlock your configuration so it can be changed. N . C S E T G N D Use the included jumper and the table below, to short the pins and set the mode for your desired configuration.
RAID Mode Setting Jumper Pins The RAID setting jumper pins, located next to the SATA connector enable you to set your desired RAID configuration between RAID 0, RAID 1, JBOD, and RAID initial Mode. RAID Setting Jumper Pins 4 5 6 SATA Connector 1 2 3 Use the included jumpers and the table below, to short the pins and set your desired RAID mode.
2. Using the RAID Mode setting jumper pins to your desired Mode. 3. Connect the SSD RAID card to your SATA host device. Note: Refer to the manual for your SATA host device for installation instructions. The top or side mounting holes and included screw kit may, or may not be required to assist in your installation. 4. Power on the SATA host device. 5. Your RAID array has now been installed. 6.
4. Follow the on screen prompts to initialize the drive in the format of your choice. LED Activity and Drive Failure Indicators The 25SAT225MSAT includes an LED panel to visually monitor activity and failure of each drive. Please review the table below for a list of each specific indication.
Technical Support StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access our comprehensive selection of online tools, documentation, and downloads. For the latest drivers/software, please visit www.startech.com/downloads Warranty Information This product is backed by a two year warranty. In addition, StarTech.
Hard-to-find made easy. At StarTech.com, that isn’t a slogan. It’s a promise. StarTech.com is your one-stop source for every connectivity part you need. From the latest technology to legacy products — and all the parts that bridge the old and new — we can help you find the parts that connect your solutions. We make it easy to locate the parts, and we quickly deliver them wherever they need to go. Just talk to one of our tech advisors or visit our website.
