Instruction manual

Instruction Manual

Bandwidth Control

Set bandwidth control on individual ports. Select the port that you wish to control, and

then enter the Tx and Rx rates. Click on the “Update” button to save the settings you’ve

entered, or click on the “Load Default” button to restore settings to the default value

for the selected port. Once settings are saved, the table will show the current values set

up for each port.

Broadcast Storm Control

This section lets you block excessive broadcast packets. Choose which port you wish

to enable protection. Select Enable for the “Broadcast Storm” option to enable this

function, and enter a value for “Threshold”. Broadcast packets will be dropped when

the number is more than entered threshold value.