Instruction manual

Instruction Manual
15
Tag Base VLAN
Select “Tag Base” from the “VLAN Mode” using the “Change Mode” button as need.
In Setup Area 1, you can choose the VLAN number, and which port you want to add or
remove a tag. In addition, you can check all the VLAN members you wish to have in this
VLAN number.
Click on the “Submit” button to save your changes.
A message box saying “Control port will not be able to connect devices” may be
displayed due to some receivers not recognizing VLAN tagging, so you may be not able
to connect to a tagged port.
In Setup Area 2, you can set the PVID of each port. If your PVID is invalid, a warning
message “Invalid VLAN status” will be shown.