Manual

Instruction Manual
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
Manual Revision: 06/21/2012
For the most up-to-date information, please visit: www.startech.com
4POSTRACK12
12U 4 Post Server Equipment Open Frame Rack Cabinet
Packaging Contents
• 2xFront/RearFrame
• 2xFloorPlates
• 4xAdjustableHorizontalArm
• 2xFloorMountingBrackets
• 1xM8Hex(Allen)key
• 8xM8x25HexSocketScrews
• 42xM5x15TrussHeadScrews
• 16xBushingCaps
• 24xCabinetScrews
• 24xCageNuts
Tools Required
• 1xPhillips(crosshead)Screwdriver
WARNING! Pleaseensurethattherackisfullyassembledwith
allincludedpartsandfastenersbeforeattemptingtomountany
rackequipment.Failuretoinstallandfullytightenanyhardware
couldseverelycompromisethestructuralintegrityoftherack.If
anyhardwareismissing,pleasecontactStarTech.comcustomer
serviceimmediately.
Installation
1. Makesurethatthefrontandrearframesarerightsideup.The
bottomoftheframehasholesfortheoormountingbrackets
andcasters.Makesurethatthepicturedendisatthebottom.
2. Attachthearmstotheframes.Separateyourarmsintopairs
(consistingofonewideandonenarrowarmperpair).Youwill
havefourpairsofarms,twoforeachsideoftherack.Thenarrow
armsthatconnectthebottomoftheframescanbeidentiedby
thepre-mountedcagenutsontheinsideofthearms.
NOTE: Wheninstallingthearms,itmightbeeasiesttostartwith
thetoparmsforstabilityreasons.
OptionalCaster
mountingpoint,on
bottomofrackframe
Pre-installed
cagenuts
Installation Cont’d
3. Forthetoparms,snapthecagenutsintotheback(inside)ofthe
narrowarms.Itisrecommendedthatyouinstallseveralcagenuts
oneacharm.Thecagenutsareeasiertoinstallwhentherackis
notfullyassembled.Youshouldinstallmorecagenutsthanmaybe
necessaryincaseyouchangethedepthoftherackinthefuture.
4. Determinethedesireddepthofyourrack.Usingtwoscrews,
attachoneofthearmstotheholesontheinsideoftheframe.
Attachtheotherarmtotheothersideoftheframe,makingsure
thatthewiderarmisontheoutsideofthenarrowarm.Securethe
twoarmstogetherusingtheprovidedscrews.
NOTE:Forstability,StarTech.comrecommendsthatyouhaveuseat
leasttwoscrewstosecuretherackarms.
5. Attachtheoormountingbrackets(theL-shapedbrackets)tothe
bottomoftheframes.Usingtheincludedhexkey,installthehex
socketscrews.Install4screwsperbracket.
6. Placetheoorplatesoverthebottomoftherack.Oneoorplate
hasonlyone“ap”alongtheside.Youcanoverlapthisoorplate
overtheotherwhennecessary.Securetheoorplatestotherack
fromthetop.
Insideofanarrow
armwithcage
nutsinstalled
Connectthe
armstothe
frameshere
HexSocketScrews
Secureoor
plates