Specifications

2
Introduction
Thank you for purchasing a StarTech.com USB 2.0 docking station. This six-in-1
expansion kit turns your laptop machine into the equivalent of a desktop computer.
You’ll give your laptop all the benefits of a desktop, with two high-speed USB 2.0 ports,
a PS/2 keyboard port, a PS/2 mouse port, a parallel port, a serial port, USB data link
port, and a 10/100 Mbits/sec Ethernet port. The USB6N1DOCK is lightweight and
compact so it won’t weigh down your laptop.
Features
• Adds two high-speed USB 2.0 ports, PS/2 keyboard and mouse ports, a parallel port,
a serial port, a USB data link port, and a 10/100 Mbits/sec Ethernet port while using
only one USB port
• Backwards compatible with USB 1.1 devices
• Alllows you to add additional hubs or docking stations for increased connectivity
• Easy to transport thanks to its compact, lightweight design
• Supports Plug and Play installation
Before You Begin
To ensure a quick and easy device installation, please read through this section carefully
before attempting to install the device.
System Requirements
• IBM-compatible Pentium-233 MHz or faster PC running Windows XP, 2000, Me, 98SE
• 64 MB of RAM or higher
•An open USB port
WARNING! This device must be installed and operated in an environment with
temperatures between 32-158ºF (0-70ºC) and humidity levels of 10-90% (non-
condensing). Make sure that the switch is kept away from heating sources and that the
vents at the side of the device are not blocked. Do not place any objects on top of the
device. Make sure that no water or moisture enters the unit. If necessary, use a
dehumidifier to reduce humidity near the device. Make sure the device is on a flat
surface. Do not drop or jostle the device.
Package Contents
•1 x USB 2.0 docking station
•1 x power adapter
•1 x driver disk