Specifications

3
Installation
Initial Installation
1. Plug the power adapter into the Power port on the left side of the device. Plug the
other end of the adapter into an appropriate power source.
2. Plug the rectangular (Type A) end of the USB 2.0 cable into an open USB 2.0 port on
your computer.
3. Plug the square (Type B) end of the USB 2.0 cable into the Upstream port on the left
side of the device.
Windows will now recognize that new hardware has been added. Follow the instructions
below on your screen to install the software. When installation is complete, a PC-Linq
icon will appear on your desktop.
Parallel
(DB-25 female)
* A DB-25 to Centronics 36 cable
may be needed to work with
some parallel printers
Serial
(DB-9 male)
Keyboard & Mouse
(PS/2 female)
USB 2.0
(Downstream)
Upstream
(USB type B female)
Power
10/100 LAN
(RJ-45 female)
Data Link
(USB type B female)
Left
Right
Back