Owners manual

Instruction manual
8
6. Remove the backing from the ve rubber pads (9) and attach them underneath the
top of the desk clamp.
7. Turn the knob on the desk clamp counterclockwise until you reach the thickness of
the desk or table that you’re attaching the ARMTRIO to.
Note: The desk mount can accommodate a desk or table that’s between 10 and 80 mm
thick (0.4 and 3.1 in.).
8. Slide the desk clamp over the edge of the desk or table. (gure 6)
9. Turn the knob clockwise to tighten the desk clamp.
gure 6
Desk clamp
Knob
Use the grommet mount to attach the ARMTRIO
Warning! Make sure that the weight of the monitors doesn’t exceed the weight
capacity of this product. If you exceed the weight capacity, you might experience
personal injury or damage to the product. This product can support the following
weight: Up to 8 kg (17.6 lb.) per monitor mount, for a total of 24 kg (52.8 lb.).
1. Remove the cap from the top of the desk clamp (6). (gure 7)
Cap
Desk clamp
gure 7