Owners manual

Instruction manual
9
2. Thread a screwdriver through the top of the desk clamp and unscrew the screw and
remove the washer and plate. (gure 8)
Tip! Keep the screw, washer, and plate in a safe place so that you can use them again if
you want to switch back to the desk clamp.
3. Remove the rod from the bottom of the desk clamp. (gure 8)
4. Thread the pole (5) through the cap that you removed from the desk clamp.
(gure 9)
Pole
Cap
gure 8
Desk clamp
Plate
Screw
Rod
Screwdriver
gure 9