Owners manual

Instruction manual
10
5. Remove the backing from the ve rubber pads (9) and ax them to the bottom of
the grommet collar (7). (gure 10)
6. Screw the pole and cap into the top of the grommet collar. (gure 11)
7. Use the 3 mm Allen key (14) to tighten the screw in the grommet collar, and push
down the cap so that it sits ush again the grommet collar. (gure 12)
gure 10
Grommet
collar
Rubber pads
gure 11
Grommet collar
Cap
Pole
gure 12
Grommet collar
Cap
Pole
3 mm Allen key