Owners manual

Instruction manual
11
8. Thread the grommet plate (8) onto the rod.
9. Place the assembled pole and grommet collar over the grommet hole in your
mounting surface, and on the underside of the mounting surface, thread the rod
up through the grommet hole and into the pole.
10. Turn the knob clockwise to tighten the grommet mount. (gure 13)
Attach the VESA monitor mounts
To accommodate dierent monitor designs, the ARMTRIO comes with two sets of
screws that are dierent lengths and diameters.
To select the appropriate screws for the type of monitors that you’re using, complete
the following:
• Determine whether the back of the monitors are ush or inset.
• Determine the depth of the mounting holes on the monitors.
• Determine the diameter of the mounting holes on the monitors.
1. Arrange the crossbar (3) so that the holes on the VESA monitor mount (11) line up
with the mounting holes on the back of one of your monitors.
2. Position four of the washers (18) over the holes on the VESA monitor mount.
gure 13
Grommet plate
Rod
Pole