Manualshelf

Owners manual

ManualsBrandsStartech.Com ManualsComputers & LaptopsStartech Desk Mount Triple Monitor Arm - Articulating Arms for Surround Setup - Supports 3 Monitors up to 24in - Steel - Height
11121314151617181920
Instruction manual
12
3. Insert four of the M4x14 mm screws (16) or the M5x14 mm screws (17) through the
washers, the VESA monitor mount, and into the monitor. (gure 14)
4. Tighten the screws.
Warning! Do not over-tighten the screws, If you encounter resistance while you’re
tightening the screws, stop tightening. Failure to do so could result in damage to the
monitor.
gure 14
Top of monitor
Crossbar
M4x14 mm screw
OR
M5x14 mm screw
Washer
5. Position one of the VESA monitor mounts over the mounting holes on the back of
one of the monitors.
Note: Make sure to position the VESA monitor mount so that the adjustment screw on
the mount is facing towards the top of the monitor.
6. Position four of the washers over the holes on the VESA monitor mount.
7. Insert four of the M4x14 mm screws or the M5x14 mm screws through the washers,
the VESA monitor mount, and into the monitor. (gure 15)
8. Tighten the screws.
9. Repeat steps 5 to 8 to attach the second VESA monitor mount to the third monitor.