Owners manual

Instruction manual
15
Attach the crossbar and monitor arms
Warning! Attaching the crossbar and monitor arms is a two-person job. Do not
attempt to complete this task by yourself.
1. Use the 3 mm Allen key (14) to loosen the screw in the collar on the pole (5).
2. Slide the collar to the height that you want the monitors to sit at, and use the 3 mm
Allen key to tighten the screw in the collar. (gure 19)
gure 19
Pole
Collar
3 mm Allen key
3. Carefully slide the crossbar (3) over the end of the pole so that it’s sitting against the
collar.
4. Use the 5 mm Allen key (15) to tighten the four screws at the back of the crossbar.
(gure 20)
gure 20
Crossbar
Pole
5 mm Allen key