Owners manual

Instruction manual
19
1. To position the monitors in the way that works best for your setup, complete any of
the following:
• To adjust the angle of the left and right monitor arms, use the 5 mm Allen
key (15) to loosen the two screws at each of the monitor arm joints. Position
the monitors at the angle you want them in, and use the 5 mm Allen key to
tighten the screws and lock the monitors into position. (gure 24)
gure 24
5 mm Allen key
• To adjust the tilt angle of the left and right monitors, use the 5 mm Allen
key (12) to loosen the screw in the sides of the VESA monitor mounts (11).
Position the monitors at the angle you want them in, and use the 5 mm Allen
key to tighten the screws and lock the monitors into position. (gure 25)
5 mm Allen key
gure 25