Owners manual

Instruction manual
6
Assembly
Attach the ARMTRIO to your mounting surface
There are two ways that you can attach the ARMTRIO to your mounting surface: a desk
clamp or a grommet mount. The desk clamp ships preassembled.
Use the desk clamp to attach the ARMTRIO
Warning! Make sure that the weight of the monitors doesn’t exceed the weight
capacity of this product. If you exceed the weight capacity, you might experience
personal injury or damage to the product. This product can support the following
weight: Up to 8 kg (17.6 lb.) per monitor mount, for a total of 24 kg (52.8 lb.).
1. Remove the cap from the top of the desk clamp (6). (gure 1)
Cap
Desk clamp
gure 1
2. Thread the pole (5) through the cap that you removed from the desk clamp.
(gure 2)
gure 2
Pole
Cap