Instruction manual
Instruction Manual
4
3. Install Receiver Unit
a) Position the Receiver Unit near the video display (i.e. television, projector).
b) Connect the video source to the HDMI® OUT on the Receiver Unit using an
HDMI® cable.
c) (Optional) If you’ve chosen to power the kit from the Receiver side, connect the
provided power supply.
4. Your source video image will now appear on the remote video display.
Specications
AV Input HDMI®
AV Output HDMI®
Interface HDMI®
Cabling Cat 5e/Cat 6 UTP
Audio Yes
Audio Specications 5.1 Surround Sound
Maximum Cable Length 10m
Max Distance 70m / 230ft
Max Resolution 1080p
Wide Screen Supported Yes
Power Adapter Included Two
Input Voltage 110~240 AC
Input Current 0.3A A
Output Voltage 5 DC V
Output Current 1A
Power Consumption 3W Max Watts