Vertical Cable Organizer with D-Ring Hooks - 20U CMVER20UD *actual product may vary from photos FR: Guide de l’utilisateur - fr.startech.com DE: Bedienungsanleitung - de.startech.com ES: Guía del usuario - es.startech.com NL: Gebruiksaanwijzing - nl.startech.com PT: Guia do usuário - pt.startech.com IT: Guida per l’uso - it.startech.com For the latest information, technical specifications, and support for this product, please visit www.StarTech.com/CMVER20UD.
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which this manual applies by the third-party company in question.
Table of Contents Introduction.............................................................................................1 Product diagram......................................................................................................................................... 1 Package contents....................................................................................................................................... 3 Installation requirements.....................................................
Introduction The CMVER20UD is a tool-less vertical cable organizer that works with virtually any two-post, four-post, or enclosed server rack or cabinet. The CMVER20UD provides an ideal solution for organizing the cables in your server rack or cabinet, and you can mount the cable organizer in different ways to suit your needs. The D-ring hooks are large enough to accommodate multiple cables of varying sizes.
Back D-ring hook D-ring hook hardware Mounting hole Mounting button Instruction manual 2
Package contents • 1 x vertical cable organizer • 2 x M4 x 16 mm screws • 4 x M4 nuts • 4 x 12 mm washers • 1 x instruction manual Installation requirements • If you relocate or remove the mounting buttons or D-ring hooks, a Phillips screwdriver is required. Installation requirements are subject to change. For the latest requirements, please visit www.StarTech.com/CMVER20UD.
Tool-less installation If you don’t need to move the mounting buttons or D-ring hooks, you don’t require any tools to attach the cable organizer to a server rack or cabinet. Note: You can attach the cable organizer to the outside or the inside of the server rack or cabinet. • Attach the cable organizer to the server rack or cabinet so that the mounting buttons fit into the keyhole-shaped mounting holes on the server rack or cabinet.
Installation using tools If your server rack doesn’t have keyhole-shaped mounting holes, you need to remove the mounting buttons or two D-ring hooks, and use the included hardware to attach the cable organizer to your server rack. Remove the mounting buttons If you want to use the holes that the mounting buttons are in to attach the cable organizer to your server rack, you need to remove the mounting buttons. • Use a Phillips screwdriver to remove the screws from the mounting buttons.
D-ring hook D-ring hook hardware Mounting button Attach the cable organizer After you remove the mounting buttons or D-ring hooks, complete the following to attach the cable organizer to your server rack: 1. Line up the mounting holes on the cable organizer with the mounting holes on any of the following on your server rack: • The vertical mounting plates. • The horizontal mounting rails. • The equipment-mounting holes.
Installation options The following images show some of the CMVER20UD installation options.
Attached to a horizontal mounting rail Instruction manual 8
Technical support StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access our comprehensive selection of online tools, documentation, and downloads. For the latest drivers/software, please visit www.startech.com/downloads Warranty information This product is backed by a two-year warranty. StarTech.
Hard-to-find made easy. At StarTech.com, that isn’t a slogan. It’s a promise. StarTech.com is your one-stop source for every connectivity part you need. From the latest technology to legacy products — and all the parts that bridge the old and new — we can help you find the parts that connect your solutions. We make it easy to locate the parts, and we quickly deliver them wherever they need to go. Just talk to one of our tech advisors or visit our website.