Vertical Cable Organizer with Finger Duct - 40U CMVER40UF *actual product may vary from photos FR: Guide de l’utilisateur - fr.startech.com DE: Bedienungsanleitung - de.startech.com ES: Guía del usuario - es.startech.com NL: Gebruiksaanwijzing - nl.startech.com PT: Guia do usuário - pt.startech.com IT: Guida per l’uso - it.startech.com For the latest information, technical specifications, and support for this product, please visit www.StarTech.com/CMVER40UF.
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which this manual applies by the third-party company in question.
Table of Contents Introduction.............................................................................................1 Product diagram......................................................................................................................................... 1 Package contents....................................................................................................................................... 3 Installation requirements.....................................................
Introduction The CMVER40UF is a vertical cable organizer that works with virtually any two-post, four-post, or enclosed server rack or cabinet. The CMVER40UF provides an ideal solution for organizing the cables in your server rack or cabinet, and you can mount the cable organizer in different ways to suit your needs. The finger ducts provide an easy and effective way to manage your cables and you can use them to run cables down the length of the server rack or cabinet.
Back Mounting hole Mounting hole Removable cover Mounting hole Mounting button Mounting hole Instruction manual 2
Package contents • 2 x vertical cable organizers • 8 x M5 cage nuts • 8 x M5 cage screws • 4 x M4 nuts • 1 x instruction manual Installation requirements • If you relocate the mounting buttons, a Phillips screwdriver is required. Installation requirements are subject to change. For the latest requirements, please visit wwwStarTech.com/CMVER40UF.
Tool-less installation If you don’t need to move the mounting buttons, you don’t require any tools to attach the cable organizers to a server rack or cabinet. You can attach the cable organizers to the outside or the inside of the server rack or cabinet. Note: If you’re attaching the cable organizer to a rack or cabinet with a roof, you should slide the removable cover down and remove it from the cable organizer before you install it.
Remove the mounting buttons If you want to use the holes that the mounting buttons are in to attach the cable organizer to your server rack, you need to remove the mounting buttons. • Use a Phillips screwdriver to remove the screws from the mounting buttons. Note: Make sure that you store the mounting buttons and screws in a safe place so that you can use them again. Mounting button Screw Mounting holes Route the cables 1. Slide the removable cover down to remove it from the cable organizer. 2.
Attach the cable organizer After you remove the mounting buttons, complete the following to attach a cable organizer to your server rack: 1. Line up the mounting holes on the cable organizer with the mounting holes on any of the following on your server rack: • The vertical mounting plates. • The horizontal mounting rails. • The equipment-mounting holes. Note: To view images of some of the different installation options mentioned above, see the “Installation options” section. 2.
Attached to a vertical mounting plate Attached to a horizontal mounting rail Instruction manual 7
Technical support StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access our comprehensive selection of online tools, documentation, and downloads. For the latest drivers/software, please visit www.startech.com/downloads Warranty information This product is backed by a two-year warranty. StarTech.
Hard-to-find made easy. At StarTech.com, that isn’t a slogan. It’s a promise. StarTech.com is your one-stop source for every connectivity part you need. From the latest technology to legacy products — and all the parts that bridge the old and new — we can help you find the parts that connect your solutions. We make it easy to locate the parts, and we quickly deliver them wherever they need to go. Just talk to one of our tech advisors or visit our website.