Owners manual

Instruction manual
5
Route the cables
1. Slide the removable cover down to remove it from the cable organizer.
2. Thread the cables through the nger ducts on the cable organizer in the way that
works best for your setup.
3. Slide the removable cover back onto the cable organizer.
Remove the mounting buttons
If you want to use the holes that the mounting buttons are in to attach the cable
organizer to your server rack, you need to remove the mounting buttons.
• Use a Phillips screwdriver to remove the screws from the mounting buttons.
Note: Make sure that you store the mounting buttons and screws in a safe place so
that you can use them again.
Screw
Mounting button
Mounting holes