Owners manual

Instruction Manual
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
Manual Revision: 03/26/2012
For the most up-to-date information, please visit: www.startech.com
Packaging Contents
• 1xFiberMediaConverter
• 1xUniversalPowerAdapter
• 3xPowerAdapterPlug(NA/UK/EU)
• 1xInstructionManual
System Requirements
• 1000BASE-TcompatibleEthernetnetworkequipment
• RJ45terminatedUTPCat5eorbetterEthernetcable
• 1000BASE-LX/SXcompatibleberopticnetworkequipment
• LC/SCterminatedsinglemode9/125μmberopticcable
• AvailableACelectricaloutlet
ET1000S40LC2 / ET91000SM402
Gigabit Ethernet to Single Mode LC/SC Fiber Media Converter - 40 KM
Installation
1. MakesuretheDIPswitchesaresetappropriatelyforyournetwork
conguration(see“DIPSwitchSettings“sectionfordetails).
2. Connecttheberopticnetworkcablefromacomputer/switch/
mediaconvertertotheLCconnectoronthemediaconverter.
NOTE: Whenconnectingthebercable,makesuretoconnect
theTx(transmit)terminalononeend,withtheRx(receive)
terminalontheotherend.
3. ConnectaUTPEthernetcable,fromacomputer/switchto
theRJ45jackonthemediaconverter.
4. Connectthepoweradaptertothemediaconverter.
5. Thefollowingexampleillustratestheconnectionscheme
whenconnectingfroma1000BASE-TEthernetportofa
hub/switchtoa1000BASE-SX/LXportofanotherhub/
switch,throughthebermediaconverter:
6. Thefollowingexampleillustratestheconnectionscheme
whenconnectingfroma1000BASE-TEthernetportona
hub/switchtoa1000BASE-TEthernetNetworkInterface
Card(NIC)inacomputerthroughthebermediaconverter:
Dip Switch
LED Indicators
Card Release
Thumbscrew
RJ45 Ethernet
connector
LC Duplex Fiber
connector
ET1000S40LC2 - Front View
ET91000SM402 - Front View
ET1000S40LC2 / ET91000SM402 - Rear View
DC Power connector
Ground point
(optional)
Dip Switch LED Indicators
Card Release
Thumbscrew
RJ45 Ethernet connector
SC Duplex Fiber
connector
DIP Switch Settings
Full/ Half:
EthernetDuplexmodewillbeconguredforFullorHalf.
LFP:
LinkFaultPass-throughwillpassalinkfailuretotheEthernet
side,ifalinkfailureisencounteredonthebersideandvice
versa.Otherwise,theEthernetsidewillcontinuetoshowno
linkfailures,evenifthebersidehasnolink.
(OFF=Notactive,On=Active)
Auto/Force:
Autonegotiateduplexmode,orforceFull/HalfviaDIPswitches.