In-Band OAM Gigabit Ethernet to MM LC Fiber Media Converter - 550m, Metal Housing ET91000LCOAM *actual product may vary from photos DE: Bedienungsanleitung - de.startech.com FR: Guide de l'utilisateur - fr.startech.com ES: Guía del usuario - es.startech.com IT: Guida per l'uso - it.startech.com NL: Gebruiksaanwijzing - nl.startech.com PT: Guia do usuário - pt.startech.com For the most up-to-date information, please visit: www.startech.
FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Table of Contents Product Overview...................................................................................1 Side 1.............................................................................................................................................................. 1 Side 2.............................................................................................................................................................. 1 Introduction..............................................
Product Overview Side 1 DC Jack Side 2 RJ-45 Default (Use to recover from lost password or to return all settings to factory default values) Power FX Speed LAN Speed LC Connector FX Link LAN Link The LAN Speed and FX Speed LEDs use 2 colors to indicate speed. Green indicates Fast Ethernet (100Mbps), while Yellow indicates Gigabit Ethernet. When the LEDs are off, it indicates a speed of 10Mbps.
Introduction Packaging Contents • 1x Fiber Media Converter • 1x Universal Power Adapter (NA/UK/EU) • 1x Instruction Manual System Requirements • 1000BASE-T compatible Ethernet network equipment • RJ45 terminated UTP Cat5e or better Ethernet cable • Available AC electrical outlet Factory Reset Procedure Apply power to the unit and allow approximately 30 seconds to fully boot. Using a pencil or a ball-point pen, press the “DEFAULT” push button located on the face plate and hold it for 6 seconds.
Installation 1. Connect the fiber optic network cable from a computer/switch/media converter to the LC connector on the media converter. NOTE: When connecting the fiber cable, make sure to connect the Tx (transmit) terminal on one end, with the Rx (receive) terminal on the other end. 2. Connect a UTP Ethernet cable, from a computer/switch to the RJ45 jack on the media converter. 3. Connect the power adapter to the media converter.
Installation into ETCHS2U Chassis The ETCHS2U chassis supports the full line of StarTech.com ET series 2 media converters, which can be installed in a mixed fashion to suit your environment. The cards are designed to be hot-swappable, meaning the chassis need not be powered off in order to remove or insert a card. 1. If the chassis slot was previously unused, loosen the screw at the top of the slot to remove the cover plate 2.
The configuration webpage will appear with the following options down the left side: For full operating instructions, please visit http://www.startech.
Specifications Supported Standards IEEE 802.3, 802.3u, 802.3ab, 802.3z, 802.3ah, 802.
Technical Support StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access our comprehensive selection of online tools, documentation, and downloads. For the latest drivers/software, please visit www.startech.com/downloads Warranty Information This product is backed by a two year warranty. In addition, StarTech.
Instruction Manual 8
Hard-to-find made easy. At StarTech.com, that isn’t a slogan. It’s a promise. StarTech.com is your one-stop source for every connectivity part you need. From the latest technology to legacy products — and all the parts that bridge the old and new — we can help you find the parts that connect your solutions. We make it easy to locate the parts, and we quickly deliver them wherever they need to go. Just talk to one of our tech advisors or visit our website.
