HDMI® to Composite Converter with Audio HD2VID *actual product may vary from photos DE: Bedienungsanleitung - de.startech.com FR: Guide de l'utilisateur - fr.startech.com ES: Guía del usuario - es.startech.com IT: Guida per l'uso - it.startech.com NL: Gebruiksaanwijzing - nl.startech.com PT: Guia do usuário - pt.startech.com For the most up-to-date information, please visit: www.startech.
FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Table of Contents Introduction......................................................................................................... 1 Packaging Contents.......................................................................................................................................................1 System Requirements....................................................................................................................................................1 Front View........................
Introduction The HD2VID HDMI® to Composite Video Converter with Audio converts a digital HDMI video source with supporting audio to work with analog Composite video televisions and displays in both NTSC and PAL systems. The HDMI to Composite converter provides features designed to ensure the highest quality output image such as 3D noise reduction, frame rate conversion and adaptive contrast enhancement, while an easy to use On-Screen Display(OSD) allows you to monitor your display status.
Front View Rear View Instruction Manual 2
Top View Instruction Manual 3
Installation Hardware Installation 1. Make sure all devices and components are powered off before attempting to install the video converter. 2. Connect the video source to the input side of the video converter using a standard HDMI cable (not included). 3. Connect the display device to the video converter using a male/male RCA composite video cable (not included). 4. If audio is being used over HDMI, connect RCA Stereo audio cables from the video converter to the speakers/audio receiver. 5.
Specifications Standard HDMI (1.2) DVI 1.0 Video Signal Input Video Signal Output Connectors Composite video 1 x HDMI type A female 1 x RCA Composite Video female 2 x RCA Stereo Audio female 1 x DC Power LEDs 1 x Power Supported Video Systems Supported Video Resolutions (Input) NTSC, PAL HD: 720p, 576p, 480p @ 60Hz PC: 1280x800, 1280x768, 1224x768, 800x600, 640x480 @ 60Hz Supported Video Resolutions (Output) 480i, 576p HDCP Support Yes (v1.
Technical Support StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access our comprehensive selection of online tools, documentation, and downloads. For the latest drivers/software, please visit www.startech.com/downloads Warranty Information This product is backed by a two year warranty. In addition, StarTech.
Hard-to-find made easy. At StarTech.com, that isn’t a slogan. It’s a promise. StarTech.com is your one-stop source for every connectivity part you need. From the latest technology to legacy products — and all the parts that bridge the old and new — we can help you find the parts that connect your solutions. We make it easy to locate the parts, and we quickly deliver them wherever they need to go. Just talk to one of our tech advisors or visit our website.
