IDE3510U2 IDE3510U2GB Instruction Manual IDE Hard Drive Enclosure 3.5” Black External USB 2.
FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Table of Contents Introduction...................................................................... 1 Packaging Contents.....................................................................1 System Requirements..................................................................1 Front View.....................................................................................2 Rear View.....................................................................................2 Installation...........................
Introduction The IDE3510U2/GB USB 2.0 IDE Hard Drive Enclosure provides costeffective external storage, letting you connect a 3.5” IDE hard drive to a computer through USB 2.0, perfect for extending the useful life of older IDE (ATA) hard drives. Packaging Contents • 1 x IDE3510U2/GB hard drive enclosure • 1 x USB cable • 1 x Enclosure Stand • 1 x Power Adapter • 1 x Instruction Manual System Requirements • 3.
Front View Thumb screws Disk Activity LED Power LED Rear View Power connector USB connector Power Switch 2
Installation WARNING: Hard drives require careful handling, especially when being transported. If you are not careful with your hard disk, lost data may result. Always handle your hard drive and storage device with caution. Hardware Installation 1. Remove the 4 thumb screws from both sides of the enclosure (8 thumb screws in total) and remove the side panels. 2. Lay the hard drive into the drive tray and connect the IDE ribbon cable and LP4 molex power connectors to the hard drive. 3.
Driver Installation Windows 2000/XP/Vista/7, Mac OS X, Linux No driver installation is required for these operating systems, as this enclosure is natively supported, so the drivers are already installed. Verifying Installation Windows 2000/XP/Server 2003/Vista From the main desktop, right-click on “My Computer” (“Computer” in Vista), then select Manage. In the new Computer Management window, select Device Manager from the left window panel. Double-click on the “Disk Drives” option.
2. Select Disk Management, in the left pane. In the right pane, you should notice the new hard drive: 3. Right-click on the Unallocated block, and select New Partition. 4. This will launch the New Partition Wizard. Please follow the instruction provided by the Wizard, to partition the drive for use. 5.
Specifications Bus Interface USB 2.0 1 x USB type B External Connectors 1 x Power Connector Chipset Initio INIC-151 LEDs Power, Activity Maximum Data Transfer Rate USB: 480Mb/s Hard Drive Compatibility 3.5” ATA/66/100/133 hard drive up to 750GB in capacity Power Adapter 12VDC, 2A, center positive Dimensions 222.0mm x 33.0mm x 124.
Technical Support StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access our comprehensive selection of online tools, documentation, and downloads. Warranty Information This product is backed by a one year warranty. In addition, StarTech.
StarTech.com has been making “hard-to-find easy” since 1985, providing high quality solutions to a diverse IT and A/V customer base that spans many channels, including government, education and industrial facilities to name just a few. We offer an unmatched selection of computer parts, cables, A/V products, KVM and Server Management solutions, serving a worldwide market through our locations in the United States, Canada, the United Kingdom and Taiwan. Visit www.startech.
