5 Port Unmanaged Industrial Ethernet Switch IES5102 *actual product may vary from photos DE: Bedienungsanleitung - de.startech.com FR: Guide de l'utilisateur - fr.startech.com ES: Guía del usuario - es.startech.com IT: Guida per l'uso - it.startech.com NL: Gebruiksaanwijzing - nl.startech.com PT: Guia do usuário - pt.startech.com For the most up-to-date information, please visit: www.startech.
FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Table of Contents Introduction.............................................................................................1 Packaging Contents.................................................................................................................................. 1 System Requirements............................................................................................................................... 1 Product Diagram.......................................................................
Introduction Packaging Contents • 1x 5 Port Ethernet Switch (w/ Attached DIN Rail Bracket) • 1x Terminal Block • 1x Instruction Manual CD System Requirements • 2 or 3-wire 12~48V DC power source • 10/100Mbps compatible Ethernet network • RJ45 terminated Ethernet cabling (Cat 5 or better recommended) Instruction Manual 1
Product Diagram Front View RJ45 Device Port RJ45 Uplink Port LED Indicators The IES5102 has LED indicators for each of the RJ45 ports on the switch to show the status of each connection LED State Indication LINK/ACT (Green) Steady Valid network connection established (Link) Flashing Transmitting or receiving data (Activity) Steady Port is transferring at 100Mbps Off Port is transferring at 10Mbps or is not transferring 100 (Amber) Rear & Side View DIN Rail Bracket Instruction Manual Groun
Installation DIN Rail Mounting 1. Hook the top, fixed DIN rail bracket on the rear of the Ethernet Switch to the top edge of the DIN rail. 2. Push the lower portion of the Ethernet Switch back against the DIN rail, which will cause the bottom, spring-loaded DIN clip to snap in place. 3. To remove the Ethernet Switch from the DIN rail, pull the small tab on the bottom of the spring-loaded clip to release it. Connecting to Power 1.
Network Connection 1. Ensure that both the IES5102 and any devices that are to be connected to it are powered off. 2. Prepare the necessary cabling for each device that is to be attached to the IES5102. Use the following chart as reference for cabling types: Speed Connector Port Speed (Half/ Full Duplex) Cable Type Max. Distance 10Base-T RJ45 10/20 Mbps 2-pair UTP/STP Cat 5 or better 100 m 100Base-TX RJ45 100/200 Mbps 2-pair UTP/STP Cat. 5 100 m 3.
Specifications Ports 5 Industry Standards IEEE 802.3 (10BASE-T), IEEE 802.3u (100BASE-TX), IEEE 802.3az (Energy Efficient Ethernet) External Ports 5 - RJ-45 Female 1 - Terminal Block (3 Wire) Maximum Data Transfer Rate 200 Mbps (Full-Duplex), 100 Mbps (HalfDuplex) Maximum Cable Length 328 ft [100 m] Flow Control IEEE 802.
Input Voltage 12 ~ 48 DC Input Current 0.05 A ~ 0.2 A Power Consumption 2.
Technical Support StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access our comprehensive selection of online tools, documentation, and downloads. For the latest drivers/software, please visit www.startech.com/downloads Warranty Information This product is backed by a two year warranty. In addition, StarTech.
Hard-to-find made easy. At StarTech.com, that isn’t a slogan. It’s a promise. StarTech.com is your one-stop source for every connectivity part you need. From the latest technology to legacy products — and all the parts that bridge the old and new — we can help you find the parts that connect your solutions. We make it easy to locate the parts, and we quickly deliver them wherever they need to go. Just talk to one of our tech advisors or visit our website.