Installation guide

Warranty Information
This product is backed by a one year warranty.
In addition, StarTech.com warrants its products against defects in materials
and workmanship for the periods noted, following the initial date of purchase. During this period, the products may be returned for repair, or replacement with
equivalent products at our discretion. The warranty covers parts and labor costs only. StarTech.com does not warrant its products from defects or damages arising
from misuse, abuse, alteration, or normal wear and tear.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their officers, directors, employees or agents) for any damages (whether direct
or indirect, special, punitive, incidental, consequential, or otherwise), loss of profits, loss of business, or any pecuniary loss, arising out of or related to the use of
the product exceed the actual price paid for the product. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws
apply, the limitations or exclusions contained in this statement may not apply to you.
MCM110ST2P
10/100Base Ethernet to 100Base-FX
Multi-Mode Fiber Media Converter ST 2KM
with PoE
Installation Guide
Packaging Contents
1 x MCM110ST2P media converter•
1 x Power Adapter•
1 x Installation Guide•
System Requirements
10/100Base compatible network•
For PoE operation: 802.3af compliant PSE (Power •
Sourcing Equipment)
Installation
Connect the Ethernet cable to the Fiber Media 1.
Converter “LAN” port.
Connect the other end of the Ethernet cable to the 2.
router/switch/computer NIC. If connecting the media
converter to a 802.3af compliant PSE, skip Step 3.
Optional:3. Plug the provided power adapter into the
media converter, and into an available AC power outlet.
Connect the fiber cable into the fiber receptacle on the 4.
media converter.
Connect the other end of the fiber cable into the 5.
router/switch/computer NIC/another media converter.
Remember to reverse the TX and RX leads between the
two devices.
LED Indicators
LED Function State Status
PWR Power Indicator
ON Converter has power
OFF
Converter has no
power
FX Link/Act
Fiber Link/
Activity
ON Fiber link OK
OFF No link detected
Flashing Receiving data
POE
Power over
Ethernet
ON PoE mode enabled
OFF PoE mode not enabled
100 Mode
ON 100Mbps
OFF 10Mbps
Full Duplex Mode
ON Full duplex mode
OFF Half duplex mode
TX Link/Act
Ethernet Link/
Activity
ON Ethernet link detected
OFF No link detected
Flashing Receiving data
Specications
Connectors
1 x RJ45 Ethernet
2 x ST Fiber
1 x power connector
LEDs
Power, Fiber Link/Activity, Ether-
net Link/Activity, 10/100, Full/Half
Duplex, PoE
Fiber Type
Multi-Mode
Maximum Distance
2 km
Transmission Standards
IEEE802.3 10BASE-T, IEEE802.3u
100BASE-TX, l00BASE-FX,
IEEE802.3af PoE PD (Class 3)
Duplex Modes
Full/Half Duplex Ethernet mode
Dimensions
73.0mm x 23.0mm x 10.8mm
Weight
170 g