Datasheet

External Notebook CPU Cooling Fan - Installation Guide

NNBBFFAANN

Revised: 12 December 2005 (A)

Press the button on the right side

of the Notebook Fan, in order to

adjust the spacing of the fastening

teeth so that they are properly

aligned with the perimeter of your

notebook’s vent. Insert the fasten-

ing teeth into the vent slots and

release the aforementioned but-

ton.

Tighten the dial until the Notebook

Fan is securely fastened to the

vent.

Insert the USB connector provided

by the Notebook Fan, to an avail-

able USB port on the notebook.

Once the USB connection is made

to a powered notebook, NBFAN will

engage and begin cooling. Please

note that this product offers two fan

speeds. To increase fan speed,

press the silver button located on

the attached dongle. To switch back

to aregular speed, click the button

again.

Installation is complete.

PAGE 1
External Notebook CPU Cooling Fan - Installation Guide NBFAN Press the button on the right side of the Notebook Fan, in order to adjust the spacing of the fastening teeth so that they are properly aligned with the perimeter of your notebook’s vent. Insert the fastening teeth into the vent slots and release the aforementioned button. Tighten the dial until the Notebook Fan is securely fastened to the vent. Insert the USB connector provided by the Notebook Fan, to an available USB port on the notebook.