Instruction manual

Instruction Manual
4
2. Setting the IP Address using a Web Browser
Please ensure that your PC’s IP address is set to the same subnet as the adapter. If not,
you will need to change your PC’s IP address from Local Area Connection Properties
menu, shown below:
Run your browser and access the product by entering the default (192.168.1.254) or
current IP address into your browser’s address window. Enter the password (default has
no password), then go to Change your IP Address, and make the necessary changes.
3. Setting the IP Address using the ETM.exe Utility
The ETM.exe is a Microsoft Windows based utility used to identify the adapters
connected on the same subnet and network segment. To run the ETM.exe utility,
please insert the driver CD supplied with the Adapter. Open the program at the
following location (assume the CD-ROM drive is at E):
E:/IO_over_IP\Utilities\EM\EM.exe