Industrial 4 Port RS232/422/485 to Dual Ethernet Serial Device Server - PoE PD NETRS42348PD *actual product may vary from photos DE: Bedienungsanleitung - de.startech.com FR: Guide de l'utilisateur - fr.startech.com ES: Guía del usuario - es.startech.com IT: Guida per l'uso - it.startech.com NL: Gebruiksaanwijzing - nl.startech.com PT: Guia do usuário - pt.startech.com For the most up-to-date information, please visit: www.startech.
FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Table of Contents Product Diagram.....................................................................................1 Front View..................................................................................................................................................... 1 Terminal Block Power Connector......................................................................................................... 2 DB-9 Connector Pinout.......................................................................
Product Diagram Front View PoE LED LED for PWR1 LED for PWR2 LED for Fault Indicator LED for Serial Port Status DB-9 Serial Ports LED for 10Base-T Connection on Ethernet Port 10/100Base-T Ethernet Ports (ETH 2 supports PoE) LED for 100Base-T Connection on Ethernet Port Instruction Manual 1
Terminal Block Power Connector The device server can be powered using a PoE connection, or using the Terminal Block connector as outlined below.
Introduction Packaging Contents • 1x Serial Device Server Unit • 1x DIN Rail Kit • 1x Wall-Mount Kit/ Screws • 2x RJ-45 Dust Covers • 1x Quick Installation Guide • 1x Software CD System Requirements • Windows® 8 (32/64bit), 7 (32/64), Vista(32/64), XP(32/64), Windows® Server 2012, 2008 R2, 2003(32/64) Instruction Manual 3
Installation Hardware Installation The server can be installed on a DIN rail or it can be wall-mounted. Installation on a DIN-Rail: 1. Tilt the unit, making sure that the metal spring located at the back is positioned on top of the DIN rail. 2. Push the unit towards the rail until a “click” sound is heard. Installation on a Wall: 1. Remove the DIN-rail kit preinstalled on the unit. 2. Install the wall-mount panel included using the 6 screws found in the package. 3.
Software Installation 1. Insert the provided CD into your DVD/CD-ROM drive. 2. Browse to the folder “fscommand\Utility\DS-Tool” and execute the installer “Startech_V1.0_xxxxxxx” 3. Follow the on-screen instructions to complete the installation. Operation For full operating instructions, please visit www.startech.com/NETRS42348PD 1. Start the DS-Tool, allow the install of the driver 2.
3. Once the utility opens, click the “Broadcast” button to detect the device server. The default IP address of device is “192.168.10.2”. 4. Once detected, click the checkbox beside the device you would like to configure, then click the “Add” button to configure your desired IP settings (Static / DHCP). To add a virtual COM port, please use the VCOM Wizard and follow the steps.
Specifications Interface Serial Ports 4 Supported Protocols ICMP, IP, TCP, UDP, DHCP, BOOTP, ARP/RARP, DNS, SNMP MIB II, HTTPS, SSH Connectors 4x DB-9 male, 1x RJ-45 1x Power over Ethernet RJ-45 1x 6pin Terminal Block LED Indicator(s) 2x Ethernet Link, P.O.E, PWR1,PWR2, fault, S1, S2, S3, S4 Supported Serial Protocols RS232/422/485 Ethernet Link Speed 10/100 Mbps Maximum Baud Rate 460.
Technical Support StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access our comprehensive selection of online tools, documentation, and downloads. For the latest drivers/software, please visit www.startech.com/downloads Warranty Information This product is backed by a five year warranty. In addition, StarTech.
Hard-to-find made easy. At StarTech.com, that isn’t a slogan. It’s a promise. StarTech.com is your one-stop source for every connectivity part you need. From the latest technology to legacy products — and all the parts that bridge the old and new — we can help you find the parts that connect your solutions. We make it easy to locate the parts, and we quickly deliver them wherever they need to go. Just talk to one of our tech advisors or visit our website.