User's Manual

and click on OK. If you select Dumb Terminal as the terminal type, some of the console
functions—especially the .Monitor. function—may not work properly.
6. Press the “ ←” backspace key (located in the upper right corner of the keyboard)
continuously whilepowering on the ATC-2000WF
.
7. Sending a continuous “ ←” backspace string to ATC-2000WF triggers it to switch
automatically
from data mode to console mode.
8. Start by configuring the IP address and WLAN under MS-DOS Command Mode.
section for instructions on how to configure the rest of the IP settings.
4
Choosing the Proper Operation Mode
In this chapter, we describe the various ATC-2000WF operation modes. The options
include
an operation mode that uses a driver installed on the host computer, and operation modes
that rely
on TCP/IP socket programming concepts. After choosing the proper operation mode in this
chapter, refer to Chapter 5 for detailed configuration parameter definitions.