Port Industrial USB to RS232 Serial Adapter with 5KV Isolation and 15KV ESD ICUSB232IS *actual product may vary from photos DE: Bedienungsanleitung - de.startech.com FR: Guide de l'utilisateur - fr.startech.com ES: Guía del usuario - es.startech.com IT: Guida per l'uso - it.startech.com NL: Gebruiksaanwijzing - nl.startech.com PT: Guia do usuário - pt.startech.com For the most up-to-date information, please visit: www.startech.
FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Table of Contents Product Overview...................................................................................1 Front View..................................................................................................................................................... 1 Rear View....................................................................................................................................................... 1 RS232 Pinout........................................................
Product Overview Front View USB Mini-B (5 pin) Female Rear View DB-9 (9 pin; D-Sub) Male RS232 Pinout Instruction Manual 1 Pin 1 DCD Pin 6 DSR Pin 2 RXD Pin 7 RTS Pin 3 TXD Pin 8 CTS Pin 4 DTR Pin 9 RI Pin 5 GND
Introduction Add a galvanically isolated RS232 serial port with ESD protection through a USB port - DIN Rail Mountable Packaging Contents • 1x USB to Serial Adapter • 1x DIN Rail Bracket • 1x 1m (3ft) USB Cable • 1x Driver CD • 1x Instruction Manual System Requirements • Available USB Port • Windows® 8 (32/64bit), 7 (32/64), Vista(32/64), XP(32/64), CE(4.2, 5.2), Windows® Server 2008 R2, 2003(32/64), Mac OS 10.x (Tested up to 10.9), Linux 2.6.x - 3.9.
Installation DIN Rail Bracket Installation If you are mounting the ICUSB232IS product onto a DIN Rail, you will first need to attach the included DIN Rail Bracket to the device. Note that the spring clip portion of the bracket should be at the bottom. 1. Hold the ICUSB232IS device with the USB port facing down and place the DIN rail bracket on the back of the device, lining up the screw holes. 2. Insert the 2 included screws and tighten.
Driver Installation Windows 1. Upon starting Windows, if the Found New Hardware wizard appears on the screen, cancel/close the window and insert the included Driver CD into the computer’s CD/ DVD drive. 2. Open the Device Manager by right-clicking on Computer, and then select Manage. In the new Computer Management window, select Device Manager from the left window panel (For Windows 8, open the Control Panel and select Device Manager). 3.
Mac OS 1. Connect the USB Serial Adapter to an available USB port. 2. Insert the provided CD into your DVD/CD-ROM drive. 3. Browse to the Mac OS folder on the disc. 4. Mount the FTDIUSBSerialDriver_v2_2_18.dmg file, and then run the FTDIUSBSerialDriver.pkg application file that is appropriate for the version of Mac OS you are running to start the install. 5. Follow the on-screen instructions to complete the installation. NOTE: You may be prompted to restart once the install completes.
Verifying Installation 1. Open the Device Manager by right-clicking on Computer, and then select Manage. In the new Computer Management window, select Device Manager from the left window panel (For Windows 8, open the Control Panel and select Device Manager). 2. Expand the Ports (COM & LPT), and Universal Serial Bus Controllers sections.
Mac OS 1. Open the System Profiler by clicking the Apple symbol in the top left corner, selecting About this Mac, then select System Report 2. Expand the “Hardware” section and click “USB” in the left column. With the adapter connected, you should see the following device in the list.
Specifications Host Interface USB 2.0 Chipset ID FTDI - FT232RL 1x DB-9 (9 pin; D-Sub) Male External Connectors 1x USB Mini-B (5 pin) Female Supported Protocols RS-232 Maximum Baud Rate 921.
Technical Support StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access our comprehensive selection of online tools, documentation, and downloads. For the latest drivers/software, please visit www.startech.com/downloads Warranty Information This product is backed by a two year warranty. In addition, StarTech.
Hard-to-find made easy. At StarTech.com, that isn’t a slogan. It’s a promise. StarTech.com is your one-stop source for every connectivity part you need. From the latest technology to legacy products — and all the parts that bridge the old and new — we can help you find the parts that connect your solutions. We make it easy to locate the parts, and we quickly deliver them wherever they need to go. Just talk to one of our tech advisors or visit our website.