Instruction manual
Instruction Manual
15
Firewall Section
IP Filter Tab
Congure the range of IP addresses that are able to access the PDU.
IP Filter Enable: Check this box to enable the IP address lter.
Allow IP Address: The rst four sections are the beginning of the IP range. The last
section is the ending of the IP range that is being given access to the device.
E.g. To authorize the IP range from 192.168.1.110 - 192.168.1.120, input as shown in the
image above
ADD: Click ADD to place the entered address range in the table.
Delete: To delete a specic IP address range, click on the “X”.
Save: Saves all changes.
This menu allows the administrator to congure user privileges and prevent
unauthorized access to the device.