PCI Express 10GBase-LR/SR/LRM Fiber Network Card with Open SFP Slot PEX10000SFP *actual product may vary from photos DE: Bedienungsanleitung - de.startech.com FR: Guide de l'utilisateur - fr.startech.com ES: Guía del usuario - es.startech.com IT: Guida per l'uso - it.startech.com NL: Gebruiksaanwijzing - nl.startech.com PT: Guia do usuário - pt.startech.com For the most up-to-date information, please visit: www.startech.
FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Table of Contents Introduction.............................................................................................1 Packaging Contents.................................................................................................................................. 1 System Requirements............................................................................................................................... 1 Product Diagram.......................................................................
Introduction Packaging Contents • 1x 1 Port PCI Express 10GBase-LR/SR/LRM Fiber Network Card • 1x Low-Profile Bracket • 1x Driver CD • 1x Instruction Manual System Requirements • PCI Express enabled computer with an available PCI Express x4 slot • 10G SFP+ transceiver module as desired • Windows® 8 / 8.1 (32/64bit), 7 (32/64), Windows Server® 2012, 2008 R2, Linux 2.6.24 and up (Tested up to 3.5), VMWare® ESXi 5.0/5.
Product Diagram Installation Hardware Installation WARNING! PCI Express cards, like all computer equipment, can be severely damaged by static electricity. Be sure that you are properly grounded before opening your computer case or touching your PCI Express card. StarTech.com recommends that you wear an anti-static strap when installing any computer component.
Note: This card will work in PCI Express slots of additional lanes (i.e. x8, or x16 slots). 4. Gently insert the card into the open PCI Express slot and fasten the bracket to the rear of the case. Note: If installing the card into a small form-factor/low-profile desktop system, replacing the pre-installed standard-profile bracket with the included low-profile (halfheight) installation bracket may be necessary. 5. Place the cover back onto the computer case. 6.
4. Expand the Other Devices section, and right-click on the newly detected “Ethernet Controller” device and select Update Driver Software, which will start the Update Driver Software Wizard. 5. On the How do you want to search for driver software Window, click Browse my computer for driver software, then Let me pick from a list of device drivers on my computer.
6. From the next screen labeled Select your device’s type from the list below, select Show All Devices (should be highlighted by default), and then click Next. Note: This screen does not appear on all systems, move on to the next step if this does not apply. 7. On the Select the Device Driver you want to install for this hardware screen, click the Have Disk button. 8. Click Browse from the Install from Disk dialog box that pops up. 9.
11. Click the OK button on the Install From Disk dialog box which will close the window. 12. Once back at the Select the Device Driver you want to install for this hardware screen, click Next and then Close once the driver has installed. 13. At this point of the install, you may receive a message pop-up stating Windows can’t verify the publisher of this driver software, click Install this driver software anyway.
Verifying Installation Windows 1. From the main desktop or start menu, right-click on “Computer” then select “Manage.” 2. In the Computer Management window, select Device Manager from the left window panel. Windows 8.1 users can right click on the Start button and click Device Manager. 3. Under the Network Adapters category should be a “Tehuti Networks 10GbE Adapter” device. Right-click on the device and select Properties to make sure it is installed and working correctly.
Connecting to a Network 1. With the power to your computer disconnected, and the computer off, if not already completed, insert the 10G SFP+ transceiver module of your choice, compatible to your network, into the SFP+ slot on the card. 2. Prepare a fiber network cable with corresponding connectors for the two end devices. One end will connect to the 10G fiber card, while the other end will connect to a 10G fiber port on your network switch/device. 3.
Specifications Ports 1 Interface Fiber Ethernet Bus Type PCI Express Card Type Standard Profile (LP bracket incl.) Industry Standards IEE 802.3ae (10GBase-LR/SR only), IEEE 802.3aq (10GBASE-LRM) PCI Express Rev 2.0 Tehuti - TN4010 Chipset ID AMCC - QT2025 Connector Type(s) 1 - PCI Express x4 Male External Ports 1 - SFP+ Slot Female Maximum Data Transfer Rate 20000 Mbps (20 Gbps) - Full-Duplex Compatible Networks 10 Gbps Full Duplex Support Yes Jumbo Frame Support 16K max.
Note Fiber data transfer speeds and distances are dependent on the SFP+ transceiver module used (sold separately) Dimensions (LxWxH) 83mm x 19mm x 120mm Product Weight 1.52 oz [43 g] LED Indicators 1 - Link/Activity (Green) Power Consumption 4.
Technical Support StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access our comprehensive selection of online tools, documentation, and downloads. For the latest drivers/software, please visit www.startech.com/downloads Warranty Information This product is backed by a two year warranty. In addition, StarTech.
Hard-to-find made easy. At StarTech.com, that isn’t a slogan. It’s a promise. StarTech.com is your one-stop source for every connectivity part you need. From the latest technology to legacy products — and all the parts that bridge the old and new — we can help you find the parts that connect your solutions. We make it easy to locate the parts, and we quickly deliver them wherever they need to go. Just talk to one of our tech advisors or visit our website.
