000Base-SX (SC) Multi-Mode Fiber Gigabit PCI Express Card PEX1000MMSC
FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Instruction Manual Table of Contents Introduction ................................................................................... 1 Package Contents........................................................................1 Installation....................................................................................... 2 Hardware Installation....................................................................2 Connecting to a Network..............................................................
Instruction Manual Introduction Thank you for purchasing a StarTech.com Multi Mode Fiber Gigabit Ethernet Card. A simple solution for connecting a host computer directly to a fiber network, the PEX1000MMSC provides full gigabit performance, ensuring the fastest network connections and reliable performance. Features • 1000Mbps-Full-duplex • Advanced Configuration Power Management Interface (ACPI) 2.
Instruction Manual Installation WARNING! PCI Express cards, like all computer equipment, can be severely damaged by static electricity. Be sure that you are properly grounded before opening your computer case or touching your card. StarTech.com recommends that you wear an antistatic strap when installing any computer component.
Instruction Manual Connecting to a Network Please note: You must connect the PCI Express Fiber Gigabit Ethernet Adapter to the network before installing the network driver. For connector type, cabling requirements, and maximum segment distance when connecting the PCI Express Gigabit Ethernet Adapter to your network, please refer to the following tables.
Instruction Manual ii. Insert the cable that is connected to the receive (RX) connector on the PCI Express Fiber Gigabit Ethernet Adapter into the transmit (TX) connector on the network switch. 6. When the cable is properly connected to two end devices, turn on the power to the PC. 7. Check the LNK (Link) LED. The LED will come on when the PCI Ex press Fiber Gigabit Ethernet Adapter is receiving a good link signal from the connected device, a switch. Software Installation 1.
Instruction Manual 4. Installation will begin... 5. Click Finish to complete the driver installation.
Instruction Manual Specifications Applicable Standards IEEE802.3 10Base-T, IEEE802.3u 100Base-TX/100Base-FX IEEE802.3ab 1000Base-T IEEE802.3z 1000Base-SX/1000Base-LX IEEE802.3x IEEE802.1Q IEEE802.1p IEEE802.
Instruction Manual Technical Support StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access our comprehensive selection of online tools, documentation, and downloads. Warranty Information This product is backed by a lifetime warranty. In addition, StarTech.
StarTech.com has been making “hard-to-find easy” since 1985, providing high quality solutions to a diverse IT and A/V customer base that spans many channels, including government, education and industrial facilities to name just a few. We offer an unmatched selection of computer parts, cables, A/V products, KVM and Server Management solutions, serving a worldwide market through our locations in the United States, Canada, the United Kingdom and Taiwan. Visit www.startech.
