3.
FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Instruction Manual Table of Contents Introduction ................................................................................... 1 Features.......................................................................................1 Package Contents........................................................................1 Installation....................................................................................... 2 Installing the PCI Express Card...................................................
Instruction Manual Introduction Thank you for purchasing a StarTech.com 3.5” Drive Bay PCI Express to Expresscard Adapter. This device offers the convenience of being able to use ExpressCards on a desktop computer, eliminating the cost of having to buy duplicate cards to perform the same function among desktop and notebook operating environments. Features • Compliant with PCI Express Base Specification 1.
Instruction Manual Installation WARNING! PCI Express cards, like all computer equipment, can be severely damaged by static electricity. Be sure that you are properly grounded before opening your computer case or touching your card. StarTech.com recommends that you wear an anti-static strap when installing any computer component.
Instruction Manual Installing the 3.5” Bay 1. Connect the Power, USB Type-B-to-10-pin-Header Adapter Cable (optional) and DVI like Expansion Cable to the appropriate connectors on the rear panel of the 3.5” ExpressCard Bay: 2. Remove the cover from a 3.
Instruction Manual 3. Continue to feed the cables into the computer case (through the open drive bay), until the ExpressCard Bay is near the opening, then press the ExpressCard Bay into the case so that it is flush with the face of the computer case: 4. Once the ExpressCard Bay has been inserted into the computer case, fasten it to the computer chassis, as you normally would a 3.5” drive (i.e. CD-ROM Drive, etc.
Instruction Manual Connect the DVI like Expansion Cable (currently connected to the ExpressCard Bay) to the PCI Express Card. Connect the remaining ends of the power cables (currently connected to the power port on the back of the ExpressCard Bay). Connect the remaining end of the USB Type-B-to-10-pin-Header Adapter Cable to an available USB (Type A) port, by threading it through an open rear panel slot to an available (external) USB port. 5.
Instruction Manual Specifications Bus Type PCI Express Form Factor 34 and 54 ExpressCard Maximum Date Transfer Rate 250 Mbps Connectors: 1x 34/54 ExpressCard Slot 1x Internal USB Type B male Connector 1x Internal USB Header 1x SP4 male Connector Operating System Support Windows® 2000/XP/Vista™ Mac OSX + Linux 6
Instruction Manual Technical Support StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access our comprehensive selection of online tools, documentation, and downloads. Warranty Information This product is backed by a one-year warranty. In addition, StarTech.
StarTech.com has been making “hard-to-find easy” since 1985, providing high quality solutions to a diverse IT and A/V customer base that spans many channels, including government, education and industrial facilities to name just a few. We offer an unmatched selection of computer parts, cables, A/V products, KVM and Server Management solutions, serving a worldwide market through our locations in the United States, Canada, the United Kingdom and Taiwan. Visit www.startech.
