Instruction manual
Instruction Manual
12
WARNING! Capacity mode is a data-destructive process. Please back up all data before
using capacity mode.
Card BIOS Method
1. When prompted on startup, press Ctrl+M to enter the card BIOS utility
Press <Ctrl>+<M> to enter BIOS Setup or <Space> to continue_
2. Using the arrow keys to navigate, move to “HBA0: Marvell 0” and press Enter
to select
3. Press Enter again to open the Conguration Wizard
4. Use the arrow keys to scroll through the list of free physical disks to select the drives
that will be part of the HyperDuo set. Press Space to select/de-select a disk.
NOTE: When a disk is selected, an asterisk (*) appears to the left of the disk label.
5. After selecting the required disks, press Enter to continue.
6. The “Create Virtual Disk” conguration options appear in the “Information” pane
(right-side), here you are able to select HyperDuo or RAID options
NOTE: The default HyperDuo mode is Safe mode.