Instruction manual
Instruction Manual
6
6. Using the included power adapter, connect the Power Adapter Port on the
S352BU33HR to an available power outlet.
7. Connect the S352BU33HR to your computer system using the included
USB 3.0 cable.
8. Set your desired RAID conguration and power on the device.
WARNING! In order to prepare your drives for RAID operation, this enclosure will
congure newly installed drives into your desired RAID conguration. Please be
aware that any data currently on the drives may be lost during this process. It is
recommended that you back up all data prior to setting your RAID conguration.