ST1000SPEX Instruction Manual PCI Express 10/100/1000 Mbps Gigabit Ethernet Card
FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Table of Contents Introduction ..................................................................... 1 Features.......................................................................................1 Package Contents........................................................................1 Hardware Guide................................................................ 2 Specifications...............................................................................4 Installation & Connection....................
Installation Package Contents • 1 x Driver CD • 1 x Gigabit Ethernet Card • 1 x Low Profile Bracket • 1 x Manual System Requirements • Windows® 2000/XP/Server 2003/Vista • PCI Express-enabled system with an available PCI Express slot • CAT5/CAT5E/CAT6 UTP/STP cable Hardware Installation To connect the ST1000SPEX to the computer motherboard: 1. Shut down all power connected to the computer, as well as all devices connected to the computer peripherally (i.e. Printers, Monitors, Scanners etc.).
that accompanied the purchase of your computer). 5. Replace the computer cover. 6. If unplugged, plug computer and all peripherals back in to power source. Turn your computer on. Driver Installation Windows® 2000/XP/Server 2003 1. When the Found New Hardware Wizard window pops up, please click the “Cancel” button to cancel the driver installation for the device at this moment. The driver will be installed in the next step. 2. Please insert the included driver CD into your CD-ROM Drive. 3.
er2003” or Realtek RTL8168/8111 Family PCI-E Gigabit Ethernet NIC (NDIS 6.0) (Windows® Vista)” installed under “Network adapters” item. Networking Settings 1. Click “Network Connection” in the Control Panel to set your network settings. 2. Right-click the Local Area Connection used by the ST1000SPEX, then select “Properties” from the pop-up menu. 3. Double-click the “Internet Protocol (TCP/IP)” item to change network settings. 4.
ST1000SPEX on another motherboard. Computer failed to start after inserting Gigabit Ethernet PCI Express Card. Turn off the computer, remove the ST1000SPEX, and try to restart the computer. If the computer starts successfully, it means that this card has not been inserted into the PCI Express slot correctly. Please insert the card firmly into the PCI Express slot or try another slot. How to deal with an exclamation point icon on the Ethernet Host controller. 1.
Specifications Bus Type PCI Express Full Duplex Support Yes LED Indicators 2 X 100 Link/Active LED (Green) Gigabit Link/Active LED (Green) Maximum Data Transfer Rate 2.
Technical Support StarTech.com’s lifetime technical support is an integral part of our commit-ment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access our comprehensive selection of online tools, documentation, and downloads. Warranty Information This product is backed by a two year warranty. In addition, StarTech.
StarTech.com has been making “hard-to-find easy” since 1985, providing high quality solutions to a diverse IT and A/V customer base that spans many channels, including government, education and industrial facilities to name just a few. We offer an unmatched selection of computer parts, cables, A/V products, KVM and Server Management solutions, serving a worldwide market through our locations in the United States, Canada, the United Kingdom and Taiwan. Visit www.startech.
