HDMI® over Fiber Video Extender with IR ST121HDFXA *actual product may vary from photos DE: Bedienungsanleitung - de.startech.com FR: Guide de l'utilisateur - fr.startech.com ES: Guía del usuario - es.startech.com IT: Guida per l'uso - it.startech.com NL: Gebruiksaanwijzing - nl.startech.com PT: Guia do usuário - pt.startech.com For the most up-to-date information, please visit: www.startech.
FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Table of Contents Introduction.............................................................................................1 Packaging Contents.................................................................................................................................. 1 System Requirements............................................................................................................................... 1 Preparing Your Site...................................................................
Introduction The ST121HDFXA is a long-range HDMI® video extender kit that uses SC fiber optic cable to extend video / audio from an HDMI®-equipped device up to 2600 feet (800 Meters) to a remote display. The extender supports full High-Definition video (1920x1200 / 1080p), and includes both the transmitter and receiver, for a complete ready-to-use digital signage solution.
Front View – Transmitter IR Transmitter Port Front View – Receiver Unit IR Receiver Port Instruction Manual 2
Rear View – Transmitter Power jack (12V DC) HDMI® IN LINK (SC-SC Fiber Connector) Rear View – Receiver Unit Power jack (12V DC) HDMI® OUT LINK (SC-SC Fiber Connector) Instruction Manual 3
Preparing Your Site 1. Determine where the local video source (i.e. computer, Blu-ray Player) will be located and set up the device. 2. Determine where the remote display will be located and place/ mount the display appropriately. NOTE: Ensure the Transmitter Unit and the Receiver Unit are situated near an available AC electrical outlet. Make sure all devices are turned off before beginning installation. Hardware Installation 1.
Hardware Reset Procedure NOTE: If video signal does not appear on the display a hardware reset can be performed on the Transmitter Unit, Receiver Units. 1. Press the reset button for more than 3 seconds on the device using a pin point tool, such as a ballpoint pen or a bent paper clip. 2. After 3 seconds disconnect the power adapter while holding the reset button. 3. Release the reset button, and reconnect the power adapter.
Specifications 1x HDMI® (19 pin) Female Local Unit Connectors 1x Fiber Optic SC Female 1x IrDA (Infrared) Female 1x HDMI® (19 pin) Female Remote Unit Connectors 1x Fiber Optic SC Female 1x IrDA (Infrared) Female Maximum Data Transfer Rate HDMI® - 1.656G x 3 Max Distance 800 m / 2600 ft.
Technical Support StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access our comprehensive selection of online tools, documentation, and downloads. For the latest drivers/software, please visit www.startech.com/downloads Warranty Information This product is backed by a two year warranty. In addition, StarTech.
Hard-to-find made easy. At StarTech.com, that isn’t a slogan. It’s a promise. StarTech.com is your one-stop source for every connectivity part you need. From the latest technology to legacy products — and all the parts that bridge the old and new — we can help you find the parts that connect your solutions. We make it easy to locate the parts, and we quickly deliver them wherever they need to go. Just talk to one of our tech advisors or visit our website.
