DVI Video Splitter ST122DVIA ST124DVIA DE: Bedienungsanleitung - de.startech.com FR: Guide de l'utilisateur - fr.startech.com ES: Guía del usuario - es.startech.com IT: Guida per l'uso - it.startech.com NL: Gebruiksaanwijzing - nl.startech.com PT: Guia do usuário - pt.startech.com For the most up-to-date information, please visit: www.startech.
FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Table of Contents Introduction.........................................................................................................................................................1 Packaging Contents.................................................................................................................................1 System Requirements.............................................................................................................................1 Top View - ST122DVIA............
Introduction The StarTech.com DVI Splitter with Audio lets you share one DVI video and audio source on two (ST122DVIA) or four (ST124DVIA) displays and also act as a signal amplifier that allows you to locate your DVI monitors up to 33ft (10m) away.
Top View - ST122DVIA Output 1 LED Output 2 LED Power/Input signal LED Power connector Rear View - ST122DVIA Instruction Manual 2
Front View - ST124DVIA Rear View - ST124DVIA 3.5mm Audio input 3.
Installation Hardware Installation 1. Make sure all devices are powered off and unplugged. 2. Connect the DVI video source (i.e. computer, HDTV box, etc.) to the Input connector on the splitter, using a standard male/male DVI cable. If using audio, also connect a 3.5mm mini-jack audio cable from the video source to the Input connector on the splitter. 3. NOTE: Use of DVI-D cables is recommended as some DVI video sources may default to using an analog signal, when a DVI-I cable is used. 4.
Driver Installation No driver installation is required to use the DVI video splitter, as it is an external, hardware-only device, that will not be seen by the host system.
Specifications ST122DVIA Video Signal ST124DVIA DVI-D (digital) Number of Ports 2 3 x 24-pin DVI-I 5 x 24-pin DVI-I Connectors 3 x 3.5mm mini-jack 5 x 3.5mm mini-jack 1 x DC Power 1 x DC Power 1 x Power/Input 1 x Power/Input 2 x Output Link 4 x Output Link LEDs 4 Maximum Video Resolution 1920x1200@60Hz Maximum Distance 10m / 33ft Maximum Video Bandwidth 350MHz HDCP Compliant Yes (1.
Technical Support StarTech.com’s lifetime technical support is an integral part of our commit-ment to provide industryleading solutions. If you ever need help with your product, visit www.startech.com/support and access our comprehensive selection of online tools, documentation, and downloads. Warranty Information This product is backed by a one year warranty. In addition, StarTech.
Hard-to-find made easy. At StarTech.com, that isn’t a slogan. It’s a promise. StarTech.com is your one-stop source for every connectivity part you need. From the latest technology to legacy products — and all the parts that bridge the old and new — we can help you find the parts that connect your solutions. We make it easy to locate the parts, and we quickly deliver them wherever they need to go. Just talk to one of our tech advisors or visit our website.
